Presonus CDL12

PresonusSKU: 1011297

Price:
Sale price$2,999.99Found a better price?

Or as low as $250.00 per month over 12 months. Learn More
Special Order This item is not in stock and can be obtained by placing a Special Order. Please note that Special Orders cannot be canceled or refunded.
Estimated ship date if ordered now:
Contact Our Specialists Need specific product information or not sure where to start? Our in-house specialists are here to help you make the right decision. With extensive knowledge of our products, they are ready and eager to assist you.

Description

Combining the best attributes of point source and line array technologies, the PreSonus CDL12 is a constant directivity loudspeaker well suited for fixed installations and mobile sound reinforcement for live bands, DJs, clubs, event halls, bars, speaking engagements, and more. The CDL12 offers consistent, coherent sound with focused pattern control and consistent SPL throughout the frequency response range.

The 15mm eucalyptus plywood enclosure houses a 2000W Class-D amplifier that powers the single 12" (1000W) woofer and eight 2" hi-mid frequency drivers (1000W), which combine to offer a frequency range (±3 dB) of 48 Hz to 18 kHz with a maximum SPL of 131 dB. With a 420 Hz crossover, the CDL12 minimizes comb filtering between the high-mid drivers and the 12" driver.

Rigging CDL12 enclosures is made easier, thanks to the integrated pin-loaded rigging hardware. A dual-angle pole mount provides support for up to two enclosures, while up to six enclosures can be flown offering a truly symmetric 120 x 120° design. Up to five enclosures can be flown with one or two of the optional CDL18 subwoofers for extended low-frequency response.

Onboard DSP presets help facilitate simplified array configurations, or connect the array via Ethernet to enable WorxControl software for Mac and Windows, which provides compression, limiting, 800 ms of delay, and 8-band EQ with individually selectable filters (HP, LP, BP, Notch, High-Shelf, Low-Shelf, and All Pass). Speakers may be grouped and managed separately or together with remote performance monitoring indicators for temperature and signal levels. Additionally, the locking Ethernet connection allow the amplifier to integrate into Dante network environment. The PreSonus CDL12 ships with a powerCON power cord

  • Constant directivity sound reinforcement loudspeaker
  • Line array and point source technology
  • Class-D amplification
    • Total System Power: 2000W peak, 1000W program (500W RMS)
    • LF Driver Power: 1000W peak, 500W program (250W RMS)
    • HF Driver Power: 1000W peak, 500W program (250W RMS)
  • 8 x 2" high-mid frequency drivers
  • 1 x 12" woofer with a 2.5" voice coil
  • 48 Hz to 18 kHz frequency response (-3 dB)
  • 131 dB SPL (max)
  • 120 x 20° (horizontal x vertical) dispersion pattern
  • Networking: Dante (audio and control), Control (only) (locking Ethernet)
  • Mains Connection: powerCON In and Out
  • User controls: Preset select, HPF on/off
  • Indicators: Over temperature, signal, -3 dB, limiter, clip, network status
  • Enclosure: 15 mm eucalyptus plywood
  • Mounting:
    • Pole Mount: Dual-position (0 and 10°)
    • Integrated Rigging: (10:1 load)
PA Speaker
Configuration Active 2-Way
Total Power Capacity 2000 W Peak
1000 W Program
500 W RMS
Amplifier Power Rating LF:
1000 W Peak
500 W Program
250 W RMS
HF:
1000 W Peak
500 W Program
250 W RMS
Amplifier Class Class-D
Drivers
HF Driver 8 x 2" / 50.8 mm Tweeter
HF Voice Coil 1" / 25.4 mm
LF Driver 1 x 12" / 30.5 cm Woofer
LF Voice Coil 2.5" / 63.5 mm
Performance
Frequency Range 20 Hz to 20 kHz
Frequency Response 48 Hz to 18 kHz -3 dB
42 Hz to 19 kHz -10 dB
Maximum SPL 131 dB
Coverage Angle 120° H x 20° V
Max Input Level +4 dB
I/O Impedance Input:
40 Kilohms
THD  
Protections DC Fault, Overcurrent, Overvoltage, Thermal, Undervoltage
Connectivity
Audio I/O 1 x XLR 3-Pin Line Input
1 x XLR 3-Pin Output
Network I/O 1 x RJ45 (Control/Dante)
Signal Processing
Crossover 420 Hz
EQ Yes
Filters High-Pass:
90 Hz, 24 dB/Octave Butterworth
Dynamic Processing Compression, HF Limiter, Limiter
Alignment Delay Yes
Max Sample Rate/Resolution 48 kHz / 24-Bit
Power
AC Input Power 90 to 260 VAC, 50 / 60 Hz 
AC Power Connector 1 x powerCON Input
1 x powerCON Output
Current Consumption 4.2 A (1/8 Power)
Physical
Mounting 1 x 1.4" / 35 mm Pole Socket (Dual Angle)
Integrated Rigging
Cooling Convection
Construction Material Metal Grille, Plywood
Dimensions 18.6 x 20.8 x 17.5" / 472.4 x 528.3 x 444.5 mm
Weight 65 lb / 29.5 kg

Estimate shipping

Request an ETA on: Presonus CDL12

ETA are subject to change. By clicking submit I understand the ETA might change once the order comes through.
Thank you for submitting your ETA Request! Our sales team will reach out with an ETA shortly.

You may also like

Recently viewed

Free Shipping

We offer Free Shipping on all orders over 199$. Conditions may apply.

Gift Card

Looking for a perfect last minute gift? Gift cards can be redeemed online or in store

Quick Financing

Shop now, pay later with Flexiti! Get approved in less than 60 seconds

100% secure

SSL (Secure Socket Layer) technology to encrypt data during the checkout process