{"title":"Modular In-Stock","description":null,"products":[{"product_id":"4ms-rotating-clock-divider","title":"4MS Rotating Clock Divider","description":"\u003cp\u003eThis colourful module is an update on the classic clock divider design, offering even and un-even divisions of 1 to 64 and a unique rotate function to shift the resulting triggers along its eight outputs.\u003c\/p\u003e\n\u003cp\u003eThe Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from \/1 to \/64, including all odd and non-standard divisions such as \/3 and \/17 and \/62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync\/start with an external clock.\u003c\/p\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDivide-by-1 to Divide-by-64, on 8 output jacks\u003c\/li\u003e\n\u003cli\u003eCV Rotate jack to shift divide-by amount on each jack\u003c\/li\u003e\n\u003cli\u003eCV Reset jack to reset\/re-sync all jacks\u003c\/li\u003e\n\u003cli\u003eOptional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate\/Trigger, Up\/Down-counting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eJacks\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClock Input (5V to 15V clock, rising edge triggered), max 3kHz\u003c\/li\u003e\n\u003cli\u003eCV Rotate (0V to +5V input)\u003c\/li\u003e\n\u003cli\u003eCV Reset (5V to 15V trigger)\u003c\/li\u003e\n\u003cli\u003eDivided Clock Outputs (8 jacks):\n\u003cul\u003e\n\u003cli\u003eDivide-by-(1+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(2+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(3+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(4+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(5+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(6+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(7+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(8+R)\u003c\/li\u003e\n\u003c\/ul\u003e\n...where R is the CV Rotation.\u003c\/li\u003e\n\u003cli\u003eSelectable Gate\/Trigger mode:\u003c\/li\u003e\n\u003cli\u003eSelectable Divide range up to Divide-by-64:\u003cbr\u003e Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.\u003c\/li\u003e\n\u003cli\u003eSelectable Auto-reset:\u003cbr\u003e Auto-reset will reset the divide counter every 16\/24\/32 clocks, which keeps the beats more \"dance-able\" even when using the \"weird\" clock divisions (3\/5\/6\/7\/9\/10\/11\/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The RCD is 4HP and 35mm (1.39\") deep\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5VSEL Jumper set to INT:\n\u003cul\u003e\n\u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e\n\u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e5VSEL Jumper set to EXT:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e\n\u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -147px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292463293,"sku":"1015551","price":247.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msrotatingclockdivider.jpg?v=1737829398"},{"product_id":"4ms-quad-clock-distributor","title":"4MS Quad Clock Distributor","description":"\u003cp\u003eFour voltage controlled clock dividers\/multipliers. The clock can be external or it can be tapped with the TapTempo button what makes the module great as a master clock generator. Complex rhythmic patterns are easily achieved by patching multiple channels into each other's Div\/Mult CV and Reset sockets.\u003c\/p\u003e\n\u003cp\u003eFour channel voltage controlled Clock Divider\/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.\u003cbr\u003eWith a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain \"Master\" clock module, and\/or a complex rhythmic pattern generator.\u003c\/p\u003e\n\u003cdiv id=\"product_info_content_container\"\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour CV-controlled Clock Divider\/Multipliers\u003c\/li\u003e\n\u003cli\u003eTap tempo button and five sync'ed clock outputs make the QCD perfect for head-of-the-chain \"Master\" clock module\u003c\/li\u003e\n\u003cli\u003eTap clock output runs at the tapped tempo (even if other channels are being clocked externally)\u003c\/li\u003e\n\u003cli\u003eCreate complex rhythmic patterns by patching multiple channels into each other's Div\/Mult CV and Reset\u003c\/li\u003e\n\u003cli\u003eEach of the four channels has an independent clock IN, OUT, Reset and Div\/Mult CV\u003c\/li\u003e\n\u003cli\u003eDivide or Multiply incoming clock from \/32 to x16 on each channel:\n\u003cul\u003e\n\u003cli\u003eDetented knob to snap to integer division\/multiples\u003c\/li\u003e\n\u003cli\u003eCV jack to modulate Div\/Mult amount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eReset jack (per channel) restarts the clock when a trigger is received (alters phase of clock)\u003c\/li\u003e\n\u003cli\u003eClock input jacks are normalized downwards: Tap-\u0026gt;Red-\u0026gt;Black-\u0026gt;Blue-\u0026gt;Green\u003c\/li\u003e\n\u003cli\u003eClock outputs stop automatically when incoming clock stops\u003c\/li\u003e\n\u003cli\u003eLEDs blink to output clocks' tempos\u003c\/li\u003e\n\u003cli\u003e5V clock output pulses, fully buffered. Default is square-wave, and PW is controllable with expander\u003c\/li\u003e\n\u003cli\u003eDaisy chain multiple QCDs or other clock modules using Tap Out jack\u003c\/li\u003e\n\u003cli\u003eHeader on the PCB to connect to Quad Pingable LFO (QPLFO) to provide four CV Skew-able, CV Div\/Mult-able envelopes\u003c\/li\u003e\n\u003cli\u003eInterfaces with QCD Expander for more features (Pulse Width, Inverted Gate, attenuverters for CV inputs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"product_info_content_container\"\u003e\n\u003cdiv id=\"specstab\" class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The QCD is 10HP and 1.0 inches (26mm) deep. \u003cbr\u003e All pots have a metal shaft and nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail:\n\u003cul\u003e\n\u003cli\u003e48mA with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e88mA with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+5V rail:\n\u003cul\u003e\n\u003cli\u003e41mA with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e-12V rail:\n\u003cul\u003e\n\u003cli\u003e40mA \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307293315261,"sku":"1015557","price":329.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-qcd-quad-clock-distributor.jpg?v=1628074345"},{"product_id":"4ms-buffered-mult","title":"4MS Buffered Mult","description":"\u003cp\u003eThe Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo independant buffered multiples, normaled together\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel has one input and three outputs that are high-grade copies of the original\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel has a bi-color LED to indicate positive (white) or negative (red) signal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVideo-rate opamps, for greatest bandwidth of any buffered mult. Fully compatible with LZX and video signals\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBottom channel is normalized to top channel, for a 1-to-6 multiple\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUseful for detecting signals, troubleshooting patches, isolating modules, preventing \"thump\" or glitches during live patching, and protecting outputs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModule size:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 4ms Buffered Mult is 3HP and 0.75 inches (18mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+12V rail: 13mA\u003cbr\u003e-12V rail: 13mA\u003cbr\u003e+5V rail: Not used (0mA)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -88px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default","offer_id":41414062211261,"sku":"1015558","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-buffmult-buffered-mult.jpg?v=1628074169"},{"product_id":"4ms-qcd-expander","title":"4MS QCD Expander","description":"\u003cp\u003eThe QCD Expander adds lots of functionality to the Quad Clock distributor like an attenuator, an inverted output with three different operation modes and a pulse width\/delay control. With the expander the QCD will generate non-linear sequences, self-evlovong rhythms, swing\/shuffle patterns, humanizing and randomness\u003c\/p\u003e\n\u003cp\u003eThe QCD Expander is an expansion module for the Quad Clock Distributor (QCD). The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing\/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to QCD module with a 16-conductor ribbon cable (included)\u003c\/li\u003e\n\u003cli\u003eMore features are added to each QCD channel:\n\u003cul\u003e\n\u003cli\u003eMulti-mode output jack INV OUT mirrors the tempo of main QCD output\u003c\/li\u003e\n\u003cli\u003eMode Switch for each INV OUT jack:\n\u003cul\u003e\n\u003cli\u003eDelayed Trigger Mode\u003c\/li\u003e\n\u003cli\u003eInverted Gate Mode\u003c\/li\u003e\n\u003cli\u003eShuffle Mode (delayed + original trigger)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePW\/Delay knob controls trigger delay time on INV OUT jack (or pulse width in Inverted Gate Mode)\n\u003cul\u003e\n\u003cli\u003eAlso controls Pulse Width of main QCD OUT jack\u003c\/li\u003e\n\u003cli\u003eCV input jack for external control\u003c\/li\u003e\n\u003cli\u003eAttenuverter allows for one channel to precisely modulate another channel's delay or pulse width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiv\/Mult CV attenuator knob\n\u003cul\u003e\n\u003cli\u003eControls how much the signal on the main QCD's Div\/Mult CV jack will modulate the tempo\u003c\/li\u003e\n\u003cli\u003eUseful for precisely modulating the speed of one channel with another\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGlobal LED brightness can be adjusted from the front panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The QCD Expander is 12HP and 0.98\" (25mm) deep. \u003cbr\u003e Four knobbed pots have a metal shaft and nut. Eight knobless pots are center-detent with white indicator line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: 44mA max\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: 30mA max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":41905203970237,"sku":"1015559","price":274.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msqcdexpander.jpg?v=1625885440"},{"product_id":"4ms-scm-kit-silver","title":"4MS SCM Kit Silver","description":"\u003cp\u003eDIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.\u003c\/p\u003e\n\u003cp\u003eBuild your own Shuffling Clock Multiplier, with the SCM kit.\u003c\/p\u003e\n\u003cp\u003eThe Do-it-yourself kit includes all the parts necessary to build a fully-featured SCM. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMultiply-by-1 to Multiply-by-32, on 8 output jacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFive Slipped\/Shuffled\/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThree steady clock outputs (x1, x2, and x8), which are not effected by Slip\/Shuffle\/Skip effects\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV Rotate jack to shift multiply-by amount on all jacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV Slip causes particular beats to land ahead in time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Re-sync, Mute, and 4x Fast\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum input frequency 3kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The SCM is 4HP and 48mm (1.85\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: __mA\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: not used\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307293806781,"sku":"1015563","price":131.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-scm-kit.jpg?v=1628074395"},{"product_id":"4ms-sism-shifting-inverting-signal-mingler","title":"4MS SISM Shifting Inverting Signal Mingler","description":"\u003cp\u003eSuper practical four-channel voltage manipulator for scaling, attenuating, inverting and mixing signals. Offset can be generated by the SISM as well and the slice function extracts the sums of all positive or negative voltages. Plenty of LEDs show what's going on with your signal.\u003c\/p\u003e\n\u003cp\u003eThe SISM is a 4-channel voltage manipulator that can scale, invert, attenuate, shift (dc offset), mix, split, and slice your CV and audio signals.\u003c\/p\u003e\n\u003cp\u003eA plethora of red and blue LEDs (14) show exactly what each channel and output jack is doing: red = negative voltage, blue = positive.\u003c\/p\u003e\n\u003cp\u003eEach channel is independent and has an input jack, output jack, a knob for attenuating\/inverting (Scale), and a knob for applying positive or negative DC offset (Shift).\u003c\/p\u003e\n\u003cp\u003eFour jacks on the bottom combine the four channels in different ways. Mix is a straight mix of all four shifted inputs, Switched Mix is a mix of all channels that have nothing plugged into the OUT jack, Positive Slice is the sum of all output voltages greater than zero volts, and Negative Slice is the sum of all negative voltages.\u003c\/p\u003e\n\u003cp\u003eBy Shifting some channels positive and some negative, the + Slice and - Slice jacks can be used as sub-mix outputs. Also, by running a slow triangle wave into one channel, the remaining channels can be made to \"dirty pan\" between the Slice jacks: the signals are half-wave rectified as they span between both outputs.\u003c\/p\u003e\n\u003cp\u003eChannels 1+2 and 3+4 are normalized together on the input jacks, which is handy for splitting a signal into two or more altered forms. Jumpers on the back allow you to disable this normalization.\u003c\/p\u003e\n\u003cp\u003eEach channel also has a jumper to make the Scale knob unipolar (no inverting, attenuate only). This is useful for mixing audio instead of CV. A breakout header allows for padding of the signal (useful for fine-tuning a precise voltage such as 1V\/oct).\u003c\/p\u003e\n\u003cp\u003eInput and Output headers for connecting to QCD, QPLFO, VCA Matrix, or other manufacturer's modules such as Toppobrillo Mixiplexer or Circuit Abbey Intermix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour independent voltage processor channels, with four mix\/mingle outputs\u003c\/li\u003e\n\u003cli\u003eEach channel has:\n\u003cul\u003e\n\u003cli\u003eInput jack\u003c\/li\u003e\n\u003cli\u003eScale knob (from inverted unity, to zero, to unity\u003c\/li\u003e\n\u003cli\u003eShift knob (adds\/subtracts DC offset from -9V to +9V)\u003c\/li\u003e\n\u003cli\u003eOutput jack\u003c\/li\u003e\n\u003cli\u003eRed and blue LEDs to indicate + or - voltage, as well as intensity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMIX jack outputs sum of all channels\u003c\/li\u003e\n\u003cli\u003eMIX SWitch jack outputs sum of all channels \u003ci\u003ewith nothing plugged into their output jack\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e+ SLICE jack outputs positive portion of mix (voltages greater than 0V)\u003c\/li\u003e\n\u003cli\u003e- SLICE jack outputs negative portion of mix (voltages less than 0V)\u003c\/li\u003e\n\u003cli\u003eRed and blue LEDs on all four mix\/mingle jacks display what the signal is doing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eAdvanced features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannels 1+2 and 3+4 are normaled together on the input, so plugging into Channel 1 (or 3) will split the signal: A jumper can disable this normalization\u003c\/li\u003e\n\u003cli\u003eScale knob has three ranges that are selectable with jumpers:\n\u003cul\u003e\n\u003cli\u003eBi-polar: -1x to +1x (inverting unity to unity) --\u003ci\u003edefault\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003eUni-polar: 0 to +1x (level fader)\u003c\/li\u003e\n\u003cli\u003eBoost: 0 to 2x (twice the voltage gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Header (2x4) for connecting the output of a QCD or QPLFO to the SISM's inputs. Plugging into the input jacks overrides the signal on the header\u003c\/li\u003e\n\u003cli\u003eOutput Header (2x4) for connecting to the input of a VCA Matrix or other compatible module\u003c\/li\u003e\n\u003cli\u003ePAD breakout header (2x4) for connecting to a breakout module that applies a pre-set pad (attenuation) to each channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e The SISM is 12HP and 0.86 inches (22mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: 51mA max\u003c\/li\u003e\n\u003cli\u003e-12V rail: 51mA max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307294036157,"sku":"1015565","price":241.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4mssismshiftinginvertingsignalmingler.jpg?v=1625885450"},{"product_id":"4ms-bus-stick-shrouded-headers","title":"4MS Bus Stick (Shrouded Headers)","description":"\u003cp\u003eThe 4ms bus stick is for use with Eurorack modular systems. The Bus Stick is a flexible solution for custom cases or cases that do not provide power. They are attached to the case via double sided adhesive. They are compatible with the 4ms ROW Power 30\/40 system and are available with keyed (shrouded) or bare\/male pin (un-shrouded) headers.\u003c\/p\u003e\n\u003cp\u003eBus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42196299153597,"sku":"1015568","price":55.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msbusstickshroudedheaders.jpg?v=1622824294"},{"product_id":"alm-beasts-chalkboard","title":"ALM Beast's Chalkboard","description":"\u003cp\u003e\u003cspan\u003e‘Beast’s Chalkboard’ is dual channel stepped voltage source and adder for your eurorack modular synthesizer system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt primarily is intended as a dual octave switcher for VCO’s but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -133px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":42307294527677,"sku":"1015759","price":183.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almbeastschalkboard.png?v=1625885458"},{"product_id":"alm-s-b-g","title":"ALM S.B.G.","description":"\u003cp\u003e\u003cspan\u003eThe ‘S.B.G’ is a compact utility module intended for the interfacing of guitar effect pedals with your eurorack modular system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt provides both attenuation and amplification of audio signals for level matching together with a crossfade control to conveniently adjust the wet\/dry mix of a processed signal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe module also offers regulation of outgoing CV signals for safer use of pedal expression inputs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -173px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":41472064913597,"sku":"1015761","price":157.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almsbg.png?v=1622824301"},{"product_id":"doepfer-mcv4-v1-10-black-w-power-supply","title":"Doepfer MCV4 V1.10 Black","description":"\u003cp\u003eMCV4 is a budget-priced MIDI-to-CV-Interface to control vintage monophonic synthesizers via MIDI. MCV4 is provided with 4 analog control voltage outputs (CV1...4) and one Gate\/Trigger output.\u003cbr\u003e\u003cbr\u003eThese are the most important MCV4 features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCV1 note on\/off und Pitch-Bend, 1V\/Oktave\u003c\/li\u003e\n\u003cli\u003eCV2 monophoner Aftertouch\u003c\/li\u003e\n\u003cli\u003eCV3 Velocity und\/oder Volumen (Controller #7)\u003c\/li\u003e\n\u003cli\u003eCV4 Velocity und\/oder beliebiger Controller (Einstellung der Controller-Nummer über Lern-Funktion)\u003c\/li\u003e\n\u003cli\u003eMIDI control of CV1..4:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCV1: note on\/off with pitch-bend, 1V\/octave characteristic\u003c\/li\u003e\n\u003cli\u003eCV2 monophic after-touch\u003c\/li\u003e\n\u003cli\u003eCV3 velocity and\/or volumen (controller #7)\u003c\/li\u003e\n\u003cli\u003eCV4 velocity and\/or any controller (setting of the controller number via learn button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003epitch-bend is used for CV1 generation with 1\/4 semitone resolution\u003c\/li\u003e\n\u003cli\u003egate output type can be selected via jumper inside the device between voltage trigger (+5V or power supply voltage) and S-trigger (switched trigger)\u003c\/li\u003e\n\u003cli\u003eMIDI channel and reference note for CV1=0V adjustable via learn button\u003c\/li\u003e\n\u003cli\u003edifferent assign modes for CV1 (highest note, last note, reference note)\u003c\/li\u003e\n\u003cli\u003eretrigger on\/off while playing legato\u003c\/li\u003e\n\u003cli\u003egate\/trigger polarity normal\/inverted\u003c\/li\u003e\n\u003cli\u003etwo 1\/4\" stereo jack sockets for CV1\/2 and CV3\/4\u003c\/li\u003e\n\u003cli\u003e1\/4\" mono jack socket for gate\/triggerlearn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4\u003c\/li\u003e\n\u003cli\u003eoptical display of gate\/trigger via LED\u003c\/li\u003e\n\u003cli\u003eMIDI-In, MIDI-Thru\u003c\/li\u003e\n\u003cli\u003enon-volatile memory for parameter settings\u003c\/li\u003e\n\u003cli\u003estable metal case (about 95x75x35 mm, 1mm sheet steel)\u003c\/li\u003e\n\u003cli\u003eUntil spring 2011 the case color was silver-grey.\u003c\/li\u003e\n\u003cli\u003eFrom spring 2011 the case color is black.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052005888189,"sku":"1015975","price":187.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-mcv4-v1-black-power-supply.png?v=1628641168"},{"product_id":"doepfer-a-102-diode-low-pass-filter","title":"Doepfer A-102 Diode Low Pass Filter","description":"\u003cp\u003eModule A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements resulting in \"strange\" resonance behaviour and frequency response as resonance and frequency are not independent from another.\u003c\/p\u003e\n\u003cp\u003eAs for the rest the A-102 is identical to the A-120 Moog low pass filter resp. the A-103 (18dB TB303 Filter). I.e. the same controls, inputs and outputs. Only the filter sound is different:\u003c\/p\u003e\n\u003cp\u003emanual control of filter frequency\u003cbr\u003e3 CV inputs (CV1, CV2, CV3), 2 of them with attenuator (CV2, CV3)\u003cbr\u003einput level control\u003cbr\u003eresonance control up to self oscillation (depends upon the frequency setting for the A-102)\u003c\/p\u003e\n\u003cp\u003eThe English manual will be available about May 2003. Until then you may look at the user's guide of A-120 or A-103.\u003c\/p\u003e\n\u003cp\u003e(As all the A-12x numbers are used up we will have to assign another number to this filter. Probably we will use the A-10X numbers)\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 60 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008935613,"sku":"1016001","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera102diodelowpassfilter.png?v=1625885517"},{"product_id":"doepfer-a-106-5-12db-sem-vcf","title":"Doepfer A-106-5 12DB SEM VCF","description":"\u003cp\u003eModule A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.\u003c\/p\u003e\n\u003cp\u003eInputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP\/HP Mix\u003c\/p\u003e\n\u003cp\u003eThe function and operation of this module is very similar to the Wasp filter module A-124. But the sound of both filters is very different ! We will publish no separate user's manual for the A-106-5 but a combined manual for both A-106-5 and A-124. The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 55 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009328829,"sku":"1016005","price":156.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera106512dbsemvcf.png?v=1625885525"},{"product_id":"doepfer-a-106-6-xp-filter","title":"Doepfer A-106-6 XP Filter","description":"\u003cp\u003eModule A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types (those filters of the A-107 that were available in the Xpander) with 8 filters available simultaneously. The toggle switch Filter Group is used to switch between 2 filter groups.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eThrese filter types are available:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e1L (6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2L (12 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3L (18 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e4L (24 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e1H (6 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2H (12 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3H (18 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2B (6 dB band pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e4B (12 dB bandpass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2N (notch)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3A (allpass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2H1L (asymmetrical band pass made of a 12 dB high pass and a 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3H1L (asymmetrical band pass made of a 18 dB high pass and a 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2N1L (combination of notch and 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3A1L (combination of allpass and 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe module features voltage controlled resonance. For filter group 2 (2L, 4L, 2B ...) even self oscillation is possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll standard VCF controls are available: manual filter frequency control \u003ci\u003eFrq\u003c\/i\u003e, one control voltage input with attenuator (\u003ci\u003eFCV2\u003c\/i\u003e)and one  without attenuator (FCV1, ~ 1 V\/octave). In addition voltage controlled resonance with \u003c\/span\u003e\u003cspan\u003emanual control (\u003ci\u003eQ\u003c\/i\u003e)  and a CV input with attenuator (\u003ci\u003eQCV\u003c\/i\u003e) are available. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe circuit is based on a 24dB lowpass filter. The outputs of the four internal filter stages (i.e. the 6, 12, 18 and 24dB outputs) are mixed together with different levels and polarities to obtain 15 different filters. Because of this special circuit the outputs have slightly different levels and noise floor. This is caused by the different internal amplifications and numbers of stages that are required to generate the filter in question. If e.g. a filter is derived by one stage only (e.g. the 6 dB, 12dB, 18dB and 24dB low pass) the noise floor is smalles compared to a filter that is derived by a combination of all four filter stages.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 12 TE \/ 12 HP \/ 60.6 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 50 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009394365,"sku":"1016006","price":280.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1066xpfilter.png?v=1625885527"},{"product_id":"doepfer-a-115-audio-divider","title":"Doepfer A-115 Audio-Divider","description":"\u003cp\u003e\u003cspan\u003eModule A-115 is a four-way frequency divider. The frequency of a signal at the input is halved (half frequency = first sub-octave), quartered (1\/4 frequency = second sub-octave), and so on. In this way, the DIVIDER produces four sub-octaves (F\/2 down to F\/16).\u003cbr\u003e At the output, the A-115 produces a summed mix of the original and the four sub-octaves. There are attenuators to control the amount (ie. Amplitude) of the original signal and each of the sub-octaves.\u003cbr\u003e Bear in mind that the sub-octaves output by the A-115 are all true square waves. At the output there are always four square waves and the original signal available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003ci\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote:\u003c\/span\u003e The new version of the A-115 (V2 2008) has an additional 3-terminal pin header with associated jumper available. JP3 at the top of the pcb (labelled \"Source #1\") is used to select if the original signal (i.e. the unchanged input signal of the In socket, not converted into rectangle) or the rectangle signal (derived from the input signal) is used for the Orig. control. In the left position of the jumper (towards the front panel) the unchanged original signal is used. In the right position the derived rectangle is used.\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 20mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307296002237,"sku":"1016013","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera115audiodivider.png?v=1625885542"},{"product_id":"doepfer-a-119-ext-input-env-follower","title":"Doepfer A-119 EXT. Input \/ ENV. Follower","description":"\u003cp\u003eModule A-119 (External Input \/ Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.\u003cbr\u003eThe pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, and a balanced input with a gain factor of from 0 to 500, for insertion of low level signals, for instance from a microphone or electric guitar.\u003cbr\u003eThe Envelope Follower reads the signal level of the input, and puts out a proportional voltage as an envelope at its own output.\u003cbr\u003eThe comparator generates a gate signal whenever the input goes above an adjustable trigger threshold.\u003cbr\u003eThree LEDs help you keep track of overload, the envelope, and the gate signal.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 30mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307296264381,"sku":"1016017","price":132.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera119extinputenvfollower.png?v=1625885551"},{"product_id":"doepfer-a-124-vcf5-wasp-filter","title":"Doepfer A-124 VCF5\/Wasp Filter","description":"\u003cp\u003eModule A-124 is a special 12dB multimode filter using the \"strange\" filter circuit of the \"EDP Wasp\" (an analog synthesizer with black\/yellow case built end of the seventies, manufactured by the UK company \"Electronic Dream Plant\" with Chris Huggett und Adrian Wagner). This design \"abuses\" digital inverters as analog operational amplifiers leading to distortions and other \"dirty\" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.\u003c\/p\u003e\n\u003cp\u003eInputs: Audio In, CV In (2x)\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio and CV attenuator, Frequency, Resonance, LP\/HP Mix\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42164683505853,"sku":"1016020","price":148.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera124vcf5waspfilter.png?v=1625885556"},{"product_id":"doepfer-a-132-3-dual-exp-lin-vca","title":"Doepfer A-132-3 Dual EXP\/LIN VCA","description":"\u003cp\u003eModule A-132-3 is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages. The input has no attenuator available but is capable to process up to 16Vss signals (i.e. -8V...+8V) without distortion.\u003c\/p\u003e\n\u003cp\u003eAs the special circuit CEM3360 used in the first version of the module is longer available we had to change the design. In modules manufactured from fall 2010 the VCA circuit SSM2164 is used. This circuit is still in production and available without problems. The main difference between the old and the new version of the module is this: for the old version with CEM3360 the maximal amplification was limited to 1. Even if the control voltage is increased the amplification stucks at 1. For the new version with SSM2164 the amplification is not limited to 1. If the control voltage is increased even a higher amplification than 1 is possible. With a corresponding input level this may lead to distortion at the output because the output swing is limited to about +\/-10V and clipping occurs. Amplification \"1\" is obtained at about position \"8\" (i.e. 3 o'clock position) of the manual control \"Gain\" for both linear and exponential mode.\u003cbr\u003eThe two versions of the module can be indentified with the help of the circuit in the middle of the pc board (CEM3360 or 2164).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052011884733,"sku":"1016027","price":171.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1323dualexplinvca.png?v=1625885571"},{"product_id":"doepfer-a-133-dual-voltage-controlled-polarizer","title":"Doepfer A-133 Dual Voltage Controlled Polarizer","description":"\u003cp\u003e-133 is a special dual voltage controlled amplifier that enables both positive and negative amplifications. Negative amplification means in this context that the signal is inverted. The main application of the module is the processing of control voltages, e.g. ADSR or LFO but the module can be used also for audio applications (e.g. as a waveshaper, see patch examples below).\u003c\/p\u003e\n\u003cp\u003eThe amplification range is about -2.5....0....+2.5 (other amplification ranges for small additional charges, e.g. -1...+1 or -5...+5). Amplification can be adjusted manually (Man control) and by an external control voltage with attenuator (CV). The present amplification is displayed with two LEDs: one for positive and one for negative amplifications (not a signal display but amplification diplay, similar to A-134).\u003cbr\u003eAnother module with polarizing function is the Polarizing Mixer A-138c.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e Tiefe\/Depth: 50 mm (gemessen ab Frontplatten-Rückseite \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307296624829,"sku":"1016029","price":125.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera133dualvoltagecontrolledpolarizer.png?v=1625885574"},{"product_id":"doepfer-a-140-adsr-envelope-generator","title":"Doepfer A-140 ADSR Envelope Generator","description":"\u003cp\u003eModule A-140 is an envelope generator, and, since it puts out control voltages, counts as one of the modulation devices in a modular system. As soon as the gate input receives sufficient voltage, the ADSR generates a variable voltage, changing in time, called an envelope. This varying voltage is output in normal (positive) and inverted form, and can be used, eg., for voltage controlled modulation of a VCO, VCF, or VCA, or for processing other modules' inputs and outputs.\u003cbr\u003eThe shape of the envelope is governed by four parameters: Attack, Decay, Sustain and Release.\u003cbr\u003eThe envelope is started (triggered) by a gate signal either from the INT.GATE voltage on the system bus, or, if a signal is put into it, from the gate input socket.\u003cbr\u003eThe envelope can also be re-triggered, ie. start from scratch again, each time a trigger signal is sensed at the Retrig. input socket, when the gate is still open.\u003c\/p\u003e\n\u003cp\u003eModule A-140 has available a three-position toggle switch to select one of three time ranges. The envelope duration ranges from about 50us (microseconds) up to several minutes.\u003c\/p\u003e\n\u003cp\u003eIn combination with the Comparator module A-167 a free-running \"ADSR-LFO\" can be realized.\u003c\/p\u003e\n\u003cp\u003eFor more detailed information please look at the English user's manual: A140_man.pdf (for printout).\u003c\/p\u003e\n\u003cp\u003eRelated modules are the 4-fold ADSR A-143-2, the voltage controlled ADSR A-141 and the voltage controlled Decay\/Gate module A-142.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8 TE \/ 8 HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 20 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307297575101,"sku":"1016042","price":132.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera140adsrenvelopegenerator.png?v=1625885604"},{"product_id":"doepfer-a-152-voltage-addressed-switch","title":"Doepfer A-152 Voltage Addressed Switch","description":"\u003cp\u003e\u003cspan\u003eModule A152 is a very useful switching and T\u0026amp;H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T\u0026amp;H that can be used as kind of an analog shift register too. The active in\/output is displayed by a LED. The digital output of the currently addressed step outputs \"high\". The remaining digital outputs are low.\u003cbr\u003e Instead of voltage control even clock\/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. The rising edge of the reset signal resets to step 1.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBasis principles:\u003c\/span\u003e The sum of the voltages coming from the manual Address control and the CV input define the currently addressed step of the 3 sub-devices. If the module is controlled by clock and reset the control voltage has to remain unchanged as the CV control has priority over the clock\/reset control (e.g. simply turn the CV control fully counterclockwise and do not touch the Address control knob).\u003cbr\u003e Sub-device #1 is the \u003cb\u003e bidirectional 8-fold multiplexer\u003c\/b\u003e (kind of an electronical 8-fold rotary switch). Bidirectional means that it works into both directions like a mechanical rotary switch: the common socket may work as an output that is connected to one of the 8 inputs that are e.g. connected to modulation or audio sources. But the common socket may even function as input. In this case the signal applied to the common socket is output to the currently addressed single socket. The voltage range of the in\/outputs to be switched is the full A-100 voltage range -12V....+12V. All A-100 signals can be switched without any restrictions.\u003cbr\u003e Sub-device #2 is the \u003cb\u003e addressed 8-fold T\u0026amp;H\u003c\/b\u003e. The signal at the common T\u0026amp;H input is connected to the addressed T\u0026amp;H output. As soon as a new output is addressed the last voltage is stored at the output (Track\u0026amp;Hold function). The T\u0026amp;H section of the A-152 allows the emulation of the \"toggling T\u0026amp;H\" function of the Buchla module 266 \"Source of Uncertainty\". Only the first two T\u0026amp;H outputs of the A-152 are required for this application. This unit can be used also as kind of an \u003c\/span\u003e\u003cspan\u003e\u003cb\u003e analog (shift) register\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e. The difference to a \"real\" analog shift register is that the sampled output voltages are not shifted to the next output but remain allocated to the same output. But in some cases (e.g. controlling the pitch of 3 VCOs by 3 output voltages of the A-152) the result is the same.\u003cbr\u003e Sub-device #3 is the \u003cb\u003e digital output section\u003c\/b\u003e. The digital output of the currently addressed turns to \"high\". All other digital outputs are low. The digital outputs can be used to trigger e.g. envelope generators or to control the reset input in the clocked mode to reduce the number of addressed stages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRemark:\u003c\/span\u003e In contrast to the Sample\u0026amp;Hold (see S\u0026amp;H \u003ca href=\"http:\/\/www.doepfer.de\/a148.htm\"\u003eA-148\u003c\/a\u003e) the output voltage follows (i.e. tracks) to the input voltage as long as the corresponding stage (1...8) is active. Just when the stage is deselected the last voltage is held.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRemark:\u003c\/span\u003e The clock signal that is fed into the Clock In socket has to be GND referenced to the A-100 frame. The reason for this is a recognition circuit at the clock input that is used to decide if the module is clock controlled or voltage controlled. For this recognition the GND pin of the Clock In socket is used. If an external clock signal is used (i.e. not coming from a module mounted into the A-100 frame where the A-152 is mounted) the GND reference is missing and the recognition circuit does not work (with the result that the clock input does not work). But there is a simple workaround: as soon as both systems are connected by means of any other patch cable that way the GND reference is established.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 16 TE \/ 16 HP \/ 80.9 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eTiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 40 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307299672253,"sku":"1016060","price":288.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-152-voltage-adressed-switch.png?v=1628640801"},{"product_id":"doepfer-a-160-1-clock-divider","title":"Doepfer A-160-1 Clock Divider","description":"\u003cp\u003e\u003cspan\u003eModule A-160 is a frequency divider for clock\/trigger\/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.\u003cbr\u003e At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1\/64. The low\/high levels of the output signals are 0V and about +10V.\u003cbr\u003e The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eBreite\/Width: 4 TE \/ 4 HP \/ 20.0 mm\u003cbr\u003e \u003cspan\u003eTiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 40 mA\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307300917437,"sku":"1016064","price":117.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1601clockdivider.png?v=1625885643"},{"product_id":"doepfer-a-177-2-foot-controller-interface-ii","title":"Doepfer A-177-2 Foot Controller Interface II","description":"\u003cp\u003eEconomically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a filter or the loudness can be controlled by a foot controller, but even other parameters like LFO frequency, modulation depth, phasing, pitch or any other voltage controlled parameter. The gate outputs controlled by the double foot switch can be used e.g. to trigger an envelope generator or to start\/stop a sequencer. Even a single foot switch can be used if only one gate signal is required.\u003c\/p\u003e\n\u003cp\u003eA special application of the A-177-2 is the usage within a Trautonium replica (for details refer to the Trautonium project article). The foot switches can be used to switch the mixtures of the subharmonic oscillator A-113. The foot controller can be used to control the overall loudness in combination with a VCA.\u003c\/p\u003e\n\u003cp\u003eA-177 is compatible with the footcontrollers FP5 and double foot switch VFP2 (see Accessories). The Foot controller and double foot switch are not included with the module but have to be ordered in addition. If you want to use another foot controller or foot switch it has to be compatible to FP5 or VFP2. In the user's manual of the no longer available module A-177 ( A177_man.pdf) you find the specification for these devices.\u003c\/p\u003e\n\u003cp\u003eIf the footcontroller FP5 is used the CV output range is about 0...+8V. The gate output levels are 0\/+12V in combination with the VFP2 (foot switch not operated = 0V, foot switch operated = +12V).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 4 TE \/ 4 HP \/ 20.0 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 30 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 10 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052019028157,"sku":"1016071","price":94.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1772footcontrollerinterfaceii.png?v=1625885660"},{"product_id":"doepfer-a-190-3-midi-to-cv-interface-w-usb","title":"Doepfer A-190-3 Midi to CV Interface w\/USB","description":"\u003cp\u003eModule A-190-3 is a Midi\/USB-to-CV\/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs (CV1...4) and one Gate output. A-190-3 is the modular version of Dark Link.\u003c\/p\u003e\n\u003cp\u003eIn\/Outputs and controls:\u003c\/p\u003e\n\u003cp\u003eUSB\u003cbr\u003eMidi Input\u003cbr\u003eLearn button\u003cbr\u003eGate Out (with LED for Gate display and learn function), 0\/+5V\u003cbr\u003eCV1: controlled by Midi note messages, 1V\/Octave, 0...+5V\u003cbr\u003eCV2: controlled by Midi pitch bend, ~ -2.5...+2.5V or ~ 0...+5V (can be selected by an internal jumper)\u003cbr\u003eCV3: controlled by Midi velocity, 0...+5V\u003cbr\u003eCV4: controlled by Midi control change messages, free assignale controller in learn mode\u003cbr\u003eGlide control (portamento function for CV1)\u003c\/p\u003e\n\u003cp\u003eOther Features:\u003c\/p\u003e\n\u003cp\u003eMidi channel, reference note and Midi control change number for CV4 are adjusted by means of a learn button and LED.\u003cbr\u003eBy means of two jumpers CV1 and Gate can be connected to the corresponding lines of the A-100 bus. That way the VCOs A-110 or A-111 and the envelope generator A-140 can be controlled directly via the A-100 bus, i.e. it's not necessary to patch CV and Gate with cables between the front panels. In addition CV1 is buffered, i.e. even several VCOs can be controlled by the A-190-3 without the need of an additional bus buffer (e.g. A-185-1 or A-185-2).\u003cbr\u003eThe gate voltage can be st to +5V or +12V by means of two jumpers. For modules of the A-100 both voltages can be used. For modules or devices from other manufacturers the gate voltage has to be set accordingly.\u003cbr\u003eIf you want to connect the gate output to devices that use S-Trig a special S-Trig cable is available. For details please refer to our FAQ page\u003cbr\u003eBy means of the precisi CV adder A-185-2 CV1 and CV2 can be added to obtain an adjustable width of the pitch bend. For this CV2 of the A-190-3 is connected to the upper input of the A-185-2 which has an attenuator available. CV1 of the A-190-3 is connected to one of the other inputs without attenuator.\u003c\/p\u003e\n\u003cp\u003eAs the A-190-3 user's manual is not yet ready the A-190-2 user's manual may be used temporarily: A190_2_man.pdf. The main difference between A-190-2 and A-190-3 is the additional USB interface of the A-190-3 and the type of LED display. The Midi control functions are the same for both modules (i.e. the function of note, program change and control change messages in learn mode). In the A-190-2 the LED shows the gate function (i.e. LED = on while gate = high \/ LED = off while gate = low). In the A-190-3 the LED is permanently on and turns off only for a short time when an incoming Midi message is recognized. It's the same type of display as used in the Dark Energy. Actually the A-190-3 is nothing but the modular version of the Dark Energy interface.\\\u003c\/p\u003e\n\u003cp\u003eAttention: The module comes with installed bus jumpers for CV and Gate. One has to remove the jumpers if e.g. an A-164, A-190-1, A-190-2, A-185-1 or A-185-2 is already connected to the CV and\/or gate lines of the same bus board! If the A-190-3 should be used as CV and gate source for the A-100 bus the CV and gate connections of other CV\/gate sources to the A-100 bus have to be removed. Otherwise short circuits are made between the outputs of the CV or gate transmitters !\u003c\/p\u003e\n\u003cp\u003eNote: The gate level of the A-190-3 can be changed from +5V to +12V. For this the jumper on JP10A (behind the CV Note socket, labelled \"GATE 5V JP10A\") has to be removed and installed to JP10B (behind the 16 pin bus connector, labelled \"GATE 12V JP10B\").\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 6 TE \/ 6 HP \/ 30.0 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eTiefe\/Depth: 55 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 60 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052021682365,"sku":"1016089","price":226.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-190-3-midi-to-cv-interface-with-usb.png?v=1628641086"},{"product_id":"doepfer-a-196-pll","title":"Doepfer A-196 PLL","description":"\u003cp\u003eModule A-196 contains a so-called phase locked loop (PLL). The basic PLL system is shown in the sketch at the bottom of this page. A PLL consists of three parts: voltage-controlled oscillator (VCO), phase comparator (PC), and low-pass filter (LPF). All parts are normally connected to form a closed-loop frequency-feedback system.\u003cbr\u003eThis is how a PLL works: The output of the internal VCO (linear CV control, rectangle output) is compared with an external signal (e.g. the rectangle output of a A-110 VCO) in the so-called phase comparator (PC). The output of the phase comparator is a digital signal (low\/high\/tristate) that indicates if the frequency resp. phase difference of the two input signals is negative, zero or positive. The output of the phase comparator is processed by a low pass filter (LPF) to generate a smooth voltage that is used to control the frequency of the internal VCO. The 3 units VCO, PC and LPF form a feedback loop that works like this: The control voltage (output of the LPF) increases as long as the external frequency is higher than the frequency of the internal VCO und stops increasing when both frequencies become identical. The control voltage decreases as long as the external frequency is lower than the frequency of the internal VCO und stops decreasing when both frequencies become identical.\u003cbr\u003eBut there are some stumbling blocks: Different types of phase comparators with advantages and disadvantages an be made. Some phase comparators e.g. even lock at harmonics, i.e. if the two frequencies to be compared are integer multiples. But for some applications this can be used to create interesting effects. The A-196 contains 3 different types of phase comparators: PC1 is a simple exclusive OR, that even locks at harmonics. PC2 is a so-called RS flipflop and PC3 a more complex digital memory network. The user can select one of the three phase comparators with a 3-position switch. When PC2 is used a LED displays the \"locked\" state, i.e. when the frequency of the internal VCO is identical to the external frequency.\u003cbr\u003eSpecial attention has to be directed to the frequency of the LPF. To obtain a smooth control voltage for the VCO the frequency of the LPF has to be much smaller than the lowest frequency of the internal or external audio signal. Otherwise the frequency of the internal VCO will jitter or wobble around the correct frequency. But for special effects this frequency jitter can be used intentionally. Example: frequencies in the range 50Hz...1kHz have to be processed with the PLL. Therefore the frequency of the LPF has to be about 10Hz or even less. Such a low frequency of the LPF causes a noticeable slew of the internal VCO. When the frequency of the external signal jumps e.g. between 500Hz and 1kHz it takes about 0.1 second until the internal VCO reaches the new frequency (like portamento). So one has to find a compromise between frequency jitter and portamento. But these remarks are valid only for the \"ideal\" working PLL. As the A-196 is used in a musical enviroment the \"problems\" and disadvantages with jitter and slew time lead to additional musical applications like portamento effects, wobbling frequencies or harmonic locking according to the type of frequency comparator and time constant of the PLL low pass filter. Instead of the internal manually controlled low pass filter the voltage controlled slew limiter A-171 can be used to obtain voltage control of this parameter. Normal audio filters (e.g. A-120, A-121) cannot be used for this job as the minimum frequency is to high (down to a few Hz or even less necessary) and the signal has to be DC coupled due to the low frequencies. Audio filters are normally AC coupled.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eApplications: frequency multiplication, special sound effects, generation of clock signals for graphic VCO (high speed VCO, e.g. for A-155 as graphic VCO), clocked audio delays or switched-capacitor filter\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8 TE \/ 8 HP \/ 40.3 mm\u003cbr\u003e Tiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 40 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052022075581,"sku":"1016093","price":140.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera196pll.png?v=1625885692"},{"product_id":"doepfer-a-199-spring-reverb","title":"Doepfer A-199 Spring Reverb","description":"\u003cp\u003eModule A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.\u003cbr\u003eThe 3-spring system used in the A-199 ensures a \"dense\" reverb because of the different properties of the three springs.\u003cbr\u003eThe A-199 implies some special features that are not self-evident for spring reverb units:\u003cbr\u003eThe reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similiar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion\/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext.Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.\u003cbr\u003eAnother feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).\u003c\/p\u003e\n\u003cp\u003eWith the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.\u003cbr\u003eUsing all these features very extreme and unusual effects can be generated with the A-199.\u003c\/p\u003e\n\u003cp\u003eInputs: Audio In, ext. Feedback In (switched socket)\u003cbr\u003eOutputs: Reverb Out (pure reverb signal), Mix Out\u003cbr\u003eControls: Level (input level), Feedback, Emphasis, Mix\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eBreite\/Width: \u003cspan style=\"text-decoration: line-through;\"\u003e10\u003c\/span\u003e\/\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e8\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e TE \/ \u003cspan style=\"text-decoration: line-through;\"\u003e10\u003c\/span\u003e\/\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e8\u003c\/b\u003e \u003c\/span\u003e\u003cspan\u003e HP \/ \u003cspan style=\"text-decoration: line-through;\"\u003e 50.5 mm\u003c\/span\u003e\/\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e40.3 mm\u003c\/b\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003ci\u003e\u003cspan\u003eim Sommer 2007 wurde das Modul auf eine  8 TE-Frontplatte umgestellt \/ in summer 2007 the front panel width has been changed to 8 HP\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/i\u003e\u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte, ohne Hallsystem \/ measured from the rear side of the front panel, without reverb system)\u003cbr\u003e Strombedarf\/Current: 80 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052022239421,"sku":"1016096","price":210.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera199springreverb.png?v=1625885696"},{"product_id":"doepfer-a-100b1-1hp-5mm","title":"Doepfer A-100B1 - 1HP\/5MM","description":"\u003cp\u003eThe DOEPFER A-100B1 is a 1HP - 3u Blank panel For eurorack modular systems.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307302228157,"sku":"1016097","price":5.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100b1.png?v=1628639958"},{"product_id":"doepfer-a-100b2-2hp-10mm","title":"Doepfer A-100B2 - 2HP\/10MM","description":"\u003cp\u003eThis Doepfer blank panel is 2HP wide (10mm).\u003c\/p\u003e\n\u003cp\u003eColor -Silver\/Grey\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307302326461,"sku":"1016098","price":5.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100b2.png?v=1628639949"},{"product_id":"doepfer-a-100b4-4hp-20mm","title":"Doepfer A-100B4 - 4HP\/20MM","description":"\u003cp\u003eThis Doepfer blank panel is 4HP wide (20mm).\u003c\/p\u003e\n\u003cp\u003eColor - Gray\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307302391997,"sku":"1016099","price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/DOEPFER_A-100B4.png?v=1645135935"},{"product_id":"doepfer-a-100b8-8hp-41mm","title":"Doepfer A-100B8 - 8HP\/41MM","description":"\u003cdiv class=\"card__section\"\u003e\n\u003cdiv class=\"rte text--pull\"\u003e\n\u003cp\u003eThis Doepfer blank panel for eurorack is 8HP wide (4120mm).\u003c\/p\u003e\n\u003cp\u003eColor - Silver\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307302588605,"sku":"1016100","price":8.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100b8.png?v=1628640083"},{"product_id":"doepfer-a-100bc-cv-gate-bus-cable","title":"Doepfer A-100BC CV\/GATE Bus Cable","description":"\u003cp\u003eDOEPFER A-100BC CV\/GATE BUS CABLE\u003cbr\u003e\u003cbr\u003eCV\/Gate bus connection cable\u003cbr\u003erequired if the CV and\/or gate signals of two bus boards have to be connected. For this the CV or gate corresponding connection jumper in the middle of the bus board is removed and replaced by the connector of the A-100BC cable. It is possible to connect the CV and gate lines of two bus boards independently (i.e. only CV or only gate or both). The cable is made of two wires with suitable connectors on each side. Ususally one wire is used for CV, the other for gate. But the wires can be ripped up and used separately. The cable length is about 20 cm.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42279680475325,"sku":"1016111","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100bmc-cv-gate-bus-cable.png?v=1628640229"},{"product_id":"intellijel-buff-mult","title":"Intellijel Buff Mult","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBuffered Multiple in 2HP\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDual 1 x 3 buffered mult (one audio or cv signal in with multiple buffered outputs).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe output of the first mult is normalled to the input of the second mult to create a 1×6 buffered mult.\u003c\/span\u003e\u003c\/p\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":42190256308413,"sku":"1016538","price":93.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/intellijelbuffmult.png?v=1622824391"},{"product_id":"intellijel-audio-interface-3u-2023-edition-1","title":"Intellijel Audio Interface 3U (2023 Edition)","description":"\u003cp class=\"p1\"\u003eAudio I\/O (2023 edition) \/ \u003cspan class=\"s1\"\u003eAudio Interface\u003c\/span\u003e two-channel input\/output module.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eAudio I\/O (2023 edition) allows you to effectively interface your Eurorack modular system to the pro audio, balanced line-level world (+4 dBu).  You can send and return to rack mount\/desktop fx units, patch to external line-level instruments like synths and drum machines, interface to a DAW and much more.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThe rear-mounted 3-pin CHAIN IN connector allows you to sum (in parallel to the panel jacks) other audio sources to go from Eurorack level to the BAL LINE OUTPUTS. This could be from modules like the Mixup 3U, xFade 1U, Stereo Mix 1U, and XY I\/O 1U. You could also use this to connect with the 3-pin headers on the Palette and 7U cases audio i\/o boards.\u003cbr\u003e \u003cbr\u003e The rear-mounted 3-pin CHAIN OUT connector allows you to directly connect the level-shifted BAL LINE IN to the inputs of other compatible devices such as the Mixup 3U, Outs 3U, Stereo Mix 1U, XY IO1U and Headphones v2 1U. You could also connect the to the TRS jacks of the Palette and 7U cases audio i\/o boards.\u003cbr\u003e \u003cbr\u003e Features:\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e2 x Balanced TRS 1\/4″ to Eurorack modular level input paths\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e2 x Eurorack modular level signals to Balanced TRS 1\/4″ output paths\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e4 x six stage analog led VU meter to monitor all inputs and outputs simultaneously\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eInput path has up to +20dB of gain, which allows you to patch in low-level consumer-level signals and boost them.\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eThe output path allows a nominal Eurorack signal (10 Vpp) to be adjusted for a balanced +4dBU line level output level\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e3pin CHAIN IN connector for other modules\/case connectors\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e3-pin CHAIN OUT connector for other modules\/case connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":42190256406717,"sku":"1016545","price":368.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/Intellijel-Audio-Interface-3U-2023-Edition_76e2e517-aba2-48ed-8db4-bf8a0fa2d4d9.jpg?v=1681333351"},{"product_id":"intellijel-springray-tank-medium","title":"Intellijel Springray Tank Medium","description":"\u003cp\u003e\u003cspan\u003eMedium sized Accutronics spring tank for Intellijel's Springray module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe spring tank is an Type 8 Accutronics 8BB2C1B with 3x1 springs and medium decay (1.75 - 3 seconds).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInput impedance 190 Ohm, output inpedance 2725 Ohm. Input connector insulated, output connector grounded.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class='\\\"product-attribute'\u003e\n\u003cp\u003e\u003cspan\u003edimensions 235 x 85.7 x 33.3mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class='\\\"product-attribute'\u003e\n\u003cspan\u003e\u003cspan class='\\\"attribute-title\\\"'\u003eWeight\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv class='\\\"product-attribute-value\\\"'\u003e\u003cspan\u003e0,3 kg\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":42306711748797,"sku":"1016552","price":45.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/intellijelspringraytankmedium.png?v=1622824413"},{"product_id":"tiptop-happy-ending-kit-silver","title":"Tiptop Happy Ending Kit Silver","description":"\u003cp\u003e\u003cspan\u003eThe happy ending kit from tiptop audio is an easy way to get everything needed to start a eurorack modular system.it includes the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1 x z-rails set plus screws to attach to z-ears or z-ears tabletop\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 x z-ears pair or 1 x z-ears tabletop pair\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 x µzeus 4hp psu with 2 x flying bus boards\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 x 15v DC 1000ma Triad external power adapter (for 110v only)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":42168828461245,"sku":"1017078","price":179.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptop-happy-ending-silver_jpg.png?v=1628859354"},{"product_id":"tiptop-happy-ending-kit-black","title":"Tiptop Happy Ending Kit Black","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThe happy ending kit from tiptop audio is an easy way to get everything needed to start a eurorack modular system. It includes the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x z-rails set plus screws to attach to z-ears or z-ears tabletop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x z-ears pair or 1 x z-ears tabletop pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x µzeus 4hp psu with 2 x flying bus boards\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 15v DC 1000ma Triad external power adapter (for 110v only)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":42168827412669,"sku":"1017084","price":178.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/TiptopHappyEndingKitBlack.jpg?v=1703778761"},{"product_id":"tiptop-uzeus-4hp-psu-with-flying-bus-board-siver","title":"Tiptop UZEUS 4HP PSU With Flying Bus Board Siver","description":"\u003cp\u003e\u003cspan\u003eThe Tiptop Audio ‘uZEUS with Flying Bus Boards’ is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size. There are two version available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe uZEUS with Flying Bus Boards version features two ribbon bus boards. Just plug in some modules and play!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power (power adapter not included).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTiptop Audio uZEUS Micro Power Supply with Flying Bus Boards\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmallest and most powerful power supply available for its size — 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFeatures 2 Ribbon Bus Boards — Just plug in and play\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMixes Linear and Switching Power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855517262013,"sku":"1017087","price":117.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopuzeus4hppsuwithflyingbusboard.png?v=1625885894"},{"product_id":"tiptop-z-ears-rackmount-pair-silver","title":"Tiptop Z-EARS Rackmount Pair Silver","description":"\u003cp\u003e\u003cspan\u003ethe z-ears are standard 3u rack ears. these parts are made of anodized aluminum and are custom made to work with eurorack mounting rails like z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855518965949,"sku":"1017088","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzearsrackmountpairsilver.png?v=1625885896"},{"product_id":"tiptop-z-ears-tabletop-rackmount-pair-silver","title":"Tiptop Z-EARS Tabletop\/Rackmount Pair Silver","description":"\u003cp\u003eTiptop Z-Ears Tabletop\/Rackmount are standard 3U rack ears for use with Z-Rails. These ears can be used as either a desktop Eurorack frame or attached to standard 19” rack. The ears are made of aluminum with anodize layer over fine bead blast texture. The ears connect to Z-Rails using two M4x10 screws, a pair for each side supplied with the ears.\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855519424701,"sku":"1017089","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzearstabletoprackmountpairsil.png?v=1625885897"},{"product_id":"tiptop-z-rails-126hp-pair-silver","title":"Tiptop Z-RAILS 126HP Pair Silver","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855521030333,"sku":"1017092","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails126hppairsilver.png?v=1625885903"},{"product_id":"tiptop-z-rails-168hp-pair-black","title":"Tiptop Z-RAILS 168HP Pair Black","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":42194273468605,"sku":"1017093","price":110.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails168hppairblack.png?v=1625885905"},{"product_id":"tiptop-z-rails-168hp-pair-silver","title":"Tiptop Z-RAILS 168HP Pair Silver","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41967086502077,"sku":"1017094","price":110.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails168hppairsilver.png?v=1625885907"},{"product_id":"tiptop-z-rails-84hp-pair-black","title":"Tiptop Z-RAILS 84HP Pair Black","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855522734269,"sku":"1017095","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails84hppairblack.png?v=1625885909"},{"product_id":"tiptop-z-rails-84hp-pair-silver","title":"Tiptop Z-RAILS 84HP Pair Silver","description":"\u003cp\u003e\u003cspan\u003eTiptop z-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":42051864821949,"sku":"1017096","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails84hppairsilver.png?v=1625885911"},{"product_id":"tiptop-z-ears-tabletop-rackmount-pair-black","title":"Tiptop Z-EARS Tabletop\/Rackmount Pair Black","description":"\u003cp\u003e\u003cspan\u003eThe z-ears tabletop are standard 3u rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminum and are custom made to work with eurorack mounting rails like z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855523487933,"sku":"1017097","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptop-z-ears-tabletop-rackmount-blk.png?v=1628114015"},{"product_id":"tiptop-zeus-access","title":"Tiptop ZEUS Access","description":"\u003cp\u003e\u003cspan\u003eThe Zeus Access contains a 2HP wide faceplate with a 2.5mm barrel socket for the external power supply and an on\/off-switch. At the back you can find two 18AWG wires with plated brass contacts that are simply connected with the according terminals of the Zeus Studio Bus. That´s it. No soldering of power inlet and switch is necessary!\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":42051864854717,"sku":"1017103","price":48.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzeusaccess.png?v=1622824547"},{"product_id":"tiptop-z-rails-104hp-pair-silver","title":"Tiptop Z-RAILS 104HP Pair- Silver","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855529582781,"sku":"1017108","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails104hppairsilver.png?v=1625885931"},{"product_id":"tiptop-z-rails-104hp-pair-black","title":"Tiptop Z-RAILS 104HP Pair- Black","description":"\u003cp\u003e\u003cspan\u003ez-rails are mounting rails for the eurorack modular synthesizer format and are designed to be used for professional and diy case mounting assemblies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ez-rails are sold in sets of two (2) aluminum, clear anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. the racks are easy to install into any frame using two 3.3mm screws, one for each side of the individual z-rails.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tip Top Audio","offers":[{"title":"Default Title","offer_id":41855530008765,"sku":"1017109","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/tiptopzrails104hppairblack.png?v=1625885933"},{"product_id":"doepfer-a-124se-vcf5-wasp-filter-special-edition","title":"Doepfer A-124SE VCF5\/Wasp Filter Special Edition","description":"\u003cp\u003e\u003cspan\u003eDoepfer A-124SE is a \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003especial 12dB multimode filter\u003c\/span\u003e\u003c\/em\u003e using the \"strange\" filter circuit of the \"\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEDP Wasp\u003c\/span\u003e\u003c\/em\u003e\" (an analog synthesizer with black\/yellow case built end of the seventies, manufactured by the UK company \"Electronic Dream Plant\" with Chris Huggett und Adrian Wagner).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis design \"abuses\" digital inverters as analog operational amplifiers leading to distortions and other \"dirty\" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInputs: Audio In, CV In (2x)\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio and CV attenuator, Frequency, Resonance, LP\/HP Mix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different ! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42164684947645,"sku":"1016115","price":156.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera124sevcf5waspfilterspecialedition.png?v=1625886173"},{"product_id":"verbos-electronics-scan-pan","title":"Verbos Electronics Scan \u0026 Pan","description":"\u003cp\u003eIn a minuscule amount of space, the Scan \u0026amp; Pan provides a 4 channel mixer with voltage control of level and panning. Since the level control was already there, the \"width\" and \"center\" controls from the Harmonic Oscillator are included to allow the user to Scan across the channels, fade between them or actively mix them together. It's signal path is all discrete transistors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Verbos Electronics","offers":[{"title":"Default Title","offer_id":42241825996989,"sku":"1017182","price":822.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/verbos-electronics-scan-and-pan.png?v=1628112133"},{"product_id":"make-noise-0-coast-single-voice-synthesizer","title":"Make Noise 0-COAST Single Voice Synthesizer","description":"\u003cp\u003eThe 0-COAST is a single voice patchable synthesizer. It’s name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka “East Coast,” and “West Coast,” due to their locations), but is loyal to neither and thus implements “no coast synthesis.”\u003c\/p\u003e\n\u003cp\u003eWhile the 0-COAST utilizes classic modular synthesis techniques, we designed it to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!\u003c\/p\u003e\n\u003cp\u003eUsing the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you’ve ever known.\u003c\/p\u003e\n\u003cp\u003eNEW revision firmware NoCoast1.6.5 adds Portamento and other MIDI features. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Channels of MIDI to CV and MIDI to Gate\u003c\/li\u003e\n\u003cli\u003eVoltage Control of all circuits\u003c\/li\u003e\n\u003cli\u003ePatchable w\/ 13 Sources and 14 Destinations\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Eurorack Modular Synthesizer Signals\u003c\/li\u003e\n\u003cli\u003eSync to MIDI Clock\u003c\/li\u003e\n\u003cli\u003eDual mode MIDI Controlled Arpeggiator\u003c\/li\u003e\n\u003cli\u003eTriangle Core Analog VCO\u003c\/li\u003e\n\u003cli\u003eUncommon Timbral Animation using OVERTONE \u0026amp; MULTIPLY\u003c\/li\u003e\n\u003cli\u003eUnique Transistor Based Low Pass Gate DYNAMICS\u003c\/li\u003e\n\u003cli\u003eExternal Audio Input for combining w\/ outside sounds\u003c\/li\u003e\n\u003cli\u003eHeadphone and Line Level Amplifier\u003c\/li\u003e\n\u003cli\u003eSmall Rugged Steel Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Make Noise","offers":[{"title":"Default Title","offer_id":42157904658621,"sku":"1016771","price":689.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/makenoise0coast.png?v=1622825223"}],"url":"https:\/\/moogaudio.com\/collections\/modular-in-stock.oembed?page=3","provider":"Moog Audio","version":"1.0","type":"link"}