{"title":"Comparator Modular","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGenerate precise control signals and gate effects with the Comparator Modular. It compares input voltages and outputs high or low signals based on thresholds, enabling rhythmic triggers, logic functions, and dynamic modulation. Perfect for adding structure, interaction, and complexity to your modular synth patches.\u003c\/p\u003e","products":[{"product_id":"joranalogue-compare-2","title":"Joranalogue Compare 2","description":"\u003cp\u003eThe window comparator is a very useful circuit building block that is common in general electronics, but rarely found in modular synths. While a regular comparator activates when the input signal voltage is higher than a threshold level, a window comparator checks if the voltage is between two levels (these form the 'window').\u003c\/p\u003e\n\u003cp\u003eCompare 2 combines two such comparators and a logic section in 8 HP. The result is an advanced tool for extracting gates and pulses from analogue signals in Eurorack synths.\u003c\/p\u003e\n\u003cp\u003eThe detection windows are defined by the shift and size parameters, which can be varied using the knobs and CV inputs. Complementary gate outputs are available, with big three-colour LEDs showing each comparator's status.\u003c\/p\u003e\n\u003cp\u003eAll inputs are normalised from the left section to the right, but the two comparators can also be used completely independently. On the bottom, the outputs from both comparators are combined in various ways by the logic section, which also features LEDs.\u003c\/p\u003e\n\u003cp\u003eYou'll find a use for this truly multi-functional module in practically any patch, processing either CV or audio: complex rhythm generator, dual pulse width modulator, frequency multiplier\/divider with PWM, digital ‘ring modulator’ with PWM, dynamic depth VCO synchronizer, voltage controlled swing, logic function array with adjustable thresholds... and many more applications waiting to be discovered!\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo independent analogue window comparators with voltage controlled parameters.\u003c\/li\u003e\n\u003cli\u003eMulti-colour LEDs show status at a glance.\u003c\/li\u003e\n\u003cli\u003eNormalisation between comparators simplifies common patches.\u003c\/li\u003e\n\u003cli\u003eComplementary gate outputs for each comparator.\u003c\/li\u003e\n\u003cli\u003eLogic section which combines the comparator outputs into AND, OR, XOR and flip-flop ('FF') signals, with LEDs.\u003c\/li\u003e\n\u003cli\u003ePrecision-milled 2 mm anodised aluminium front panel with high-resolution, non-erasable graphics.\u003c\/li\u003e\n\u003cli\u003eBullet-proof design: polarised power header and MOSFET protection circuit.\u003c\/li\u003e\n\u003cli\u003eIncludes 16-to-10-pin Eurorack power ribbon cable.\u003c\/li\u003e\n\u003cli\u003ePremium mounting hardware: black screws, black nylon washers and matching hex key.\u003c\/li\u003e\n\u003cli\u003eHigh-quality components and assembly; designed and made in Belgium.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Joranalogue","offers":[{"title":"Default Title","offer_id":41931464409277,"sku":"1016632","price":279.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/joranalogue-comoare-2.jpg?v=1628855838"},{"product_id":"random-source-serge-smooth-stepped-gen-ssg","title":"RANDOM SOURCE SERGE SMOOTH\u0026STEPPED GEN (SSG)","description":"\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe Serge Smooth \u0026amp; Stepped Generator (SSG) is a complex multi-functional module which can be patch programmed to provide various slew and sample functions both for audio and CV signals. It is one of the essential Serge modules.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe Smooth section will place a positive and negative slew on input voltage transitions for lag effects, voltage controlled portamento and for low frequency filter applications.” In Cycle-mode (cycle jack patched to the input), the Smooth side “will oscillate yielding a voltage controlled triangle wave LFO. A high level into the HOLD input will enable the Smooth Function to be used as a track-and-hold circuit with voltage controlled slew rate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe Stepped function can be used as a sample-and-hold with voltage controlled slew rate limiting. In Cycle mode, a pulse applied to the Sample input will generate complex staircase waveforms for control voltage applications and for use as audio signals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe Coupler is an internal comparator which compares the output levels of the Smooth and the Stepped Generators. This output is useful for generating complex control voltages or random voltages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli class=\"li2\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eWidth: 18HP\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eDepth: 40mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003ePower: 30mA @+12v \/ 30mA @-12v\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Random Source","offers":[{"title":"Default Title","offer_id":42568030126269,"sku":"1031335","price":523.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/RANDOMSOURCESERGESMOOTH_STEPPEDGEN_SSG.jpg?v=1672434721"},{"product_id":"random-source-serge-ncom-euro-smt","title":"RANDOM SOURCE SERGE NCOM EURO (SMT)","description":"\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe Serge Divide by N Comparator (NCOM) is a rare, much sought-after and very essential Serge module covering a number of functions: comparator, voltage-controlled pulse divider, and voltage-controlled staircase generator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe ÷N COMPARATOR consists of two sections - a comparator (right side) and a voltage-controlled pulse divider (left side). The ÷N output of the pulse divider sends out a pulse on every N-th comparator pulse where N is a number from 1 to 31. N can be (pre-)set with the divider’s control knob (1 ÷N) and can by changed with a control voltage. The VC knob (attenuator)on the bottom of the left side determines how much effect the control voltage has on “N”. In addition, the divider generates a staircase waveform with N steps. This can be used to produce whole-tone steps when run into the 1V\/Oct input of a VCO or as a stepped control voltage to change for instance the cutoff of a filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eThe comparator provides a number of useful “housekeeping functions”: Logical decisions (if the +input is greater than the -input, the output will be high, otherwise low), Level detection (whenever a variable waveform crosses the theshold, a pulse is generated ), Pulse width modulation or Rectifying a waveform (e.g. a sine or triangle wave). (More applications and info in the Build Doc).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003eNow - for the first time and licenced by Serge - the NCOM is available as DIY kit for Euro.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSome details of the Random*Source Serge NCOM module kit:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eUnder licence from and in cooperation with Serge Tcherepnin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003ePrecision voltage source for improved accuracy\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eNew version (SMT), slimmer and more precise than ever!\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003e2 extra attenuators\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eEurorack format (3U), 10 hp\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003ePower consumption: 20mA @ +12V, 18mA @ -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eModule depth: \u0026lt; 40mm (1.5 »)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"s1\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eThe Random*Source DIY Kit contains:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003eColor printed front panel, 2mm, cnc made in germany\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003e1 Serge NCOM Euro pcb (SMT, all SMTcomponents mounted)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\" data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"s2\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\" data-mce-fragment=\"1\"\u003e1 matching panel pcb\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Random Source","offers":[{"title":"Default Title","offer_id":42568030847165,"sku":"1031341","price":354.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/RANDOMSOURCESERGENCOMEURO_SMT.jpg?v=1672433595"},{"product_id":"instruo-aradh-eurorack-module","title":"Instruo Aradh Eurorack Module","description":"\u003cp class=\"p1\"\u003eEurorack Module Instruo Aradh.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA long time in development, Áradh is the long-awaited successor to the first Instruō low pass filter, Tràigh.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eExpanding on Tràigh’s classic functionality, Áradh adds a VCA with pre or post-filter routing options, an envelope follower, a comparator gate, a strike input with variable decay time and a plethora of user-definable voltage-controlled parameter combinations.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIt's a true sound-shaping powerhouse in only 6 HP!\u003c\/p\u003e","brand":"Instruo","offers":[{"title":"Default Title","offer_id":42766632583357,"sku":"1032620","price":525.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/Instruo-Aradh.jpg?v=1682952054"},{"product_id":"xaoc-drezno-ii-1989-binary-conversion-komputor","title":"Xaoc Drezno II 1989 Binary Conversion Komputor","description":"\u003cp class=\"p1\"\u003eDREZNO II BINARY CONVERSION COMPUTOR Model of 1989.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDrezno II [\u003cspan class=\"s1\"\u003eˈ\u003c\/span\u003edr\u003cspan class=\"s1\"\u003eɛ\u003c\/span\u003ezn\u003cspan class=\"s1\"\u003eɔ\u003c\/span\u003e] is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on\/off) signals. These signals are arranged as 8 bits of digital data and may represent analog signals and voltages,or they may be whatever you want them to be (clocks, gates, rhythms, etc.).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDrezno features an ADC (analog-to-digital-converter) and DAC (digital-to-analog-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analog signals and CVs into digital numbers, as well as to obtain analog signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBoth (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analog signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCompared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNEW FEATURES:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCalibrated quantization\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSwitched voltage range\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eVastly improved accuracy and noise floor\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTECHNICAL DETAILS:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEurorack synth compatible\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e12hp, skiff friendly\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCurrent draw: +80mA\/-50mA\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eReverse power protection\u003c\/p\u003e","brand":"Xaoc Devices","offers":[{"title":"Default Title","offer_id":42819259662525,"sku":"1032856","price":459.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/Xaoc-Drezno-II-1989-Binary-Conversion-Komputor.jpg?v=1683812134"},{"product_id":"klavis-dual-voltage-comparator-compair-silver","title":"Klavis Dual Voltage Comparator Compair Silver","description":"\u003cp class=\"p1\"\u003eThe ComPair is a versatile yet compact and affordable tool to expand your sonic arsenal. Voltage comparison is used to trigger events, reshape and mangle waveforms and realize level-dependent logic functions.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTwo sections can be used independently as voltage against manual setting comparison. Additionaly, the first section allows voltage against voltage comparison with offset adjustement.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhen used globally, the module offers a powerful window comparator whith CV-controlled top setting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe outputs benefit from three triple-position switches, allowing independently settable polarity and muting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThree LEDs indicate the output logic to keep track of what's happening.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWindow comparator \/ Dual voltage comparator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eTwo independent channels, A \u0026amp; B, also\u003cbr\u003euseable globally as a window comparator\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eNormalized input A copies the signal into input B for window comparison.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eHi and Lo bipolar threshold adjustment knobs\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eHi input adds to the Hi setting knob\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eSeparate outputs for:\u003c\/li\u003e\n\u003cul class=\"ul2\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eAbove Hi setting\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eBetween Hi and Lo settings\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eBelow Lo setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e3-position switch on each output offers:\u003c\/li\u003e\n\u003cul class=\"ul2\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eInverted logic\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eOutput mute\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eNormal logic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eOutputs can be ORed with a multiple.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eUseable for audio or triggering\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eCompact module\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eEloxal printed aluminium (silver panel)\u003cbr\u003eor bath anodized brushed aluminium (black panel)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klavis","offers":[{"title":"Default Title","offer_id":44660970029245,"sku":"1043252","price":183.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/Klavis-Dual-Voltage-Comparator-Compair-Silver.jpg?v=1732200945"},{"product_id":"klavis-dual-voltage-comparator-compair-black","title":"Klavis Dual Voltage Comparator Compair Black","description":"\u003cp class=\"p1\"\u003eThe ComPair is a versatile yet compact and affordable tool to expand your sonic arsenal. Voltage comparison is used to trigger events, reshape and mangle waveforms and realize level-dependent logic functions.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTwo sections can be used independently as voltage against manual setting comparison. Additionaly, the first section allows voltage against voltage comparison with offset adjustement.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhen used globally, the module offers a powerful window comparator whith CV-controlled top setting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe outputs benefit from three triple-position switches, allowing independently settable polarity and muting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThree LEDs indicate the output logic to keep track of what's happening.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWindow comparator \/ Dual voltage comparator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eTwo independent channels, A \u0026amp; B, also\u003cbr\u003euseable globally as a window comparator\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eNormalized input A copies the signal into input B for window comparison.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eHi and Lo bipolar threshold adjustment knobs\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eHi input adds to the Hi setting knob\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eSeparate outputs for:\u003c\/li\u003e\n\u003cul class=\"ul2\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eAbove Hi setting\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eBetween Hi and Lo settings\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eBelow Lo setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e3-position switch on each output offers:\u003c\/li\u003e\n\u003cul class=\"ul2\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eInverted logic\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eOutput mute\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eNormal logic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eOutputs can be ORed with a multiple.\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eUseable for audio or triggering\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eCompact module\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003eEloxal printed aluminium (silver panel)\u003cbr\u003eor bath anodized brushed aluminium (black panel)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klavis","offers":[{"title":"Default Title","offer_id":44660970062013,"sku":"1043253","price":183.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/Klavis-Dual-Voltage-Comparator-Comparator-Black.jpg?v=1732201083"},{"product_id":"doepfer-a-143-1-quad-ad-complex-envelope-generator","title":"Doepfer A-143-1 Quad AD \/Complex Envelope Generator","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eModule A-143-1 is a complex envelope generator that consists of Attack\/Decay generators. For the complex envelope generator the four units are daisy-chained, i.e. the preceeding unit triggers the following unit. The four units can be used even as four separate AD generators (switch position AD) or AD-type LFOs (switch position ).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDetails: \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eModule A-143-1 contains four separate attack\/decay type envelope generators. Each unit can be switched into a free running mode (LFO mode). The LFO mode differs in several points from a regular LFO (like A-145, A-146 or A-147): The slopes are exponential - in contrast to linear slopes of a normal LFO, and the frequency is defined by both controls. The attack control defines the time of the rising slope, the decay control the falling slope.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eEach unit has available a comparator that compares the AD output voltage with a manually adjustable threshold and switches the corresponding comparator output (Cp 1...4) to \"high\" as soon as the AD output voltage goes in the decay phase below this value. The comparator output is normalled to the trigger input of the next stage via the switching contact of the trigger input socket. Consequently the first unit triggers the second, the second triggers the third and so on.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eEach AD generator is equipped with a Polarizer (look at the Voltage Controlled Polarizer A-133 concerning details about the polarizer function) and a mixer that adds up all polarizer outputs. This allows to add up all AD\/LFO output signals inverting or non-inverting with adjustable level to the mix output. Additionally a single output (Env 1...4) is available for each unit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eIf the trigger input of unit 1 is controlled by a normal gate signal (e.g. from a keyboard resp. MIDI-to-CV\/Gate interface) one obtains a very complex envelope signal at the mix output. The signal contains 8 segments controlled by Attack 1, Decay 1, Attack 2, Decay 2, Attack 3, Decay 3, Attack 4 and Decay 4. The transition between the stages (i.e. when the following AD generator is triggered) is controlled by threshold knob. The positive or negative contribution of each unit to the mix signal is adjusted with the Mixing Polarizer control. If the trigger input of unit 1 is controlled by the comparator output of unit 4 one obtains a 8 stage LFO.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eThe single AD outputs can be used to control VCAs or VCFs that open one after another corresponding to the AD signals (a little bit similar to the Shepard generator A-191).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eThe default-connection between the four units (CPn = Trig.n+1) can be interrupted by patching cables into the trigger inputs. Consequently the four units can be used as separate AD generators or LFOs. In any case the mix signal is available (e.g. mix of four AD generators or LFOs with adjustable level and sign).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eIn the LFO mode the comparator output serves as LFO rectangle output with adjustable pulse width (= threshold control).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003eEach unit is equipped with a separate LED display for envelop and comparator output. The shortest attack\/decay time is about 5 ms, the longest attack\/decay times are about 3 seconds (attack) \/ 10 seconds (decay). By changing the value of a capacitor the shortest time can be modified\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":44875342905533,"sku":"1049329","price":396.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/files\/DoepferA-143-1QuadADComplexEnvelopeGenerator.jpg?v=1741401677"}],"url":"https:\/\/moogaudio.com\/collections\/comparator-modular.oembed","provider":"Moog Audio","version":"1.0","type":"link"}